The Best Paint Gun for Beginners!

(If You Are Spraying Primer, Base Coat, Clear Coat; This is the Spray Gun For You!)

The Techline T3 HVLP is an economically priced gravity feed gun for use with a range of coatings from primers to top coats to stains.

The T3 combines C.A.T. HVLP fine finish nozzles on a low cost gun body so you can achieve the best of both worlds - economy and fine finish. Features include air adjusting valve and 750 cc plastic cup. Specifications:
Air Inlet 1/4" NPS (m)
Fluid Inlet: 16m x 1.5
Weight 27 oz.
Standard set up 1.3 fluid tip x 1013 air cap 13.5 CFM Automotive Finishes. See drop down box for additional gun set ups. For additional information see parts sheet. For personal service call toll free 877-490-1777.

Techline T3 Spray Gun Repair Kit 10-111
Parts Sheet - Techline T3.
Sales Sheet - Techline T3.

This HVLP Spray Gun Knocks Down Orange Peel and Has Superb Flake Control For Color Matching!!

Jaguar 300H HVLP Gravity Feed Gun is an excellent tool for automotive base coat and clear coat applications. Forged aluminum body, Stainless steel fluid passages. Specifications: Air Inlet: 1/4" NPS (m) Fluid Inlet 16m x 1.5 Weight 25 oz. Standard setup: 1.3 fluid tip x 1013 air cap 13.5 CFM for base coat, clear coat, spot, panel applications.

See Jaguar 300H setups for additional selections. For more information please see parts sheet.
for additional assistance please call toll free 877-490-1777

Repair Kit - 10-105.
Parts Sheet - Jaguar 300H.

Gravity At It's Best!

The Jaguar J100H is a general purpose gravity feed gun for automotive and wood finishing. Features include all stainless steel fluid passages, low volume nozzles for small air compressors and self adjusting needle packing. The gun comes standard with 750cc aluminum gravity cup. Specifications: Air Inlet 1/4" NPS (m) Fluid Inlet 16m x 1.5 Weight: 25 oz. Standard setup 1.4 fluid tip x 1093 air cap 10 CFM Low CFM General Industrial & Wood Finishes.

See drop down box for Jaguar 100H setup options. Please reference the parts sheet for additional information. For additional assistance call toll free 877-490-1777.

J100H - Parts Sheet
J100H HVLP Spray Gun Repair Kit - 10-105.

Jaguar SLP is a Fine Finish Gravity Feed Gun
for Automotive and Wood Finishing.

Features include stainless steel fluid passages & superfine atomization achieved with the patented 12 point atomization. Smoke like atomization allows for producing excellent blending and gloss. The JSLP requires only 29 psi inlet pressure to achieve 10 psi at the nozzle. Specifications: Air Inlet: 1/4" NPS (m) Fluid Inlet: 16m x 1.5 Weight: 25 oz. Standard setup: 1.3 fluid tip x 23-1313 air cap 13.5 CFM; Automotive Finishes.

See Jaguar SLP for additional setup selections. For more information please see parts sheet.

This gun is also offered in the following Cat Packs.

This HVLP spray gun is available in a Cat Pack with 3M PPS Gravity Cup set up for wood finishing

This HVLP spray gun is also available in a Cat Pack with 3M PPS set up for automotive refinish

This HVLP spray gun is also available in a Cat Pack with an aluminum gravity cup set up for wood finishes

This HVLP spray gun is also available in a Cat Pack with an aluminum gravity cup set up for automotive refinish

SLP Repair Kit.

Spray Gun Covers.

Parts Sheet - Jaguar SLP HVLP

Jaguar SLP HVLP (Fine Finish - Stainless Low Pressure)

The Jaguar SLP HVLP is a fine finish HVLP Spray Gun for auto refinish and wood finishing. The gun comes with stainless steel fluid passages and excellent atomization. the JSLP requires only 29 psi inlet pressure to achieve 10 psi at the nozzle. Meets all regulations for HVLP spray guns.
Specifications:
Air inlet: 1/4" NPS (m)
Fluid inlet: 16mm x 1.5mm(m)
Weight: 25 oz.

See Cat Packs for Best Value! Wood Set Up. Auto Refinish Set Up

Standard setup 1.3 x 1313. Requires 13.5 CFM
Parts Sheet - Jaguar SLP
Repair Kit - 10-105.

(1)