125 ml Gravity Cups With Lid for TJR Gun.

Plastic 750 CC gravity cup ( 1 quart ) for use with gravity guns.
All cups have a no drip feature in the lid. The cup has a 16mm x 1.5 female connector.

Aluminum 400 CC Gravity Cup
for use with gravity guns. All cups have a no drip feature in the lid. The cup has a 16mm x 1.5 female connector.

Aluminum 150 ML Gravity Cup for TJR Gun.

Aluminum 400 CC Gravity Cup with Lid for TJR Gun

The Task Is Simple With The 1 Quart Siphon Cup From C.A. Technologies

The siphon cups from C.A. Technologies are all drip proof and are made of aluminum alloy. This is the standard 1 quart model.

Lid Gasket - 51-358

.
All cups have a no drip feature in the lid. The cup has a 16mm x 1.5 female connector.

Aluminum 1000 CC Gravity Cup
( 1 lt. ) for use with gravity guns.

All cups have a no drip feature in the lid. The cup has a 16mm x 1.5 female connector.

C.A. Technologies 1 Quart Pressure Cup
This 1 quart pressure cup is designed for applications where higher fluid delivery pressure is needed. This cup has a screw lid and is designed for higher fluid pressures.

The cup is an aluminum cup and has a max pressure rating of 50 psi.

See unit with regulator - With Regulator.

Lid Gasket - 31-358.

1 Quart Pressure Assist Cup (HVLP)
The 1 quart pressure cup is perfect for small painting jobs that require pressure to assist in fluid delivery without the ability to adjust the cup pressure. The cup is aluminum and is fitted with a one way check valve to prevent fluid from going back up into the gun. It is designed for HVLP use, connects to head of gun and has a max pressure of 10 psi. (Please note, requires ported Lynx gun.) This cup is for use only for CAT guns with ported heads only.

Parts Sheet - 51-303.
Check Valve Assy - 51-324.
Lid Gasket - 51-334.

This unit is the same as the 51-350 with the addition of a regulator for accurate adjustments. 51-350 shown. Unit is priced with regulator.

Lid Gasket - 31-358.

The Best Aluminum 1 Quart Pressure Cup!

(If you use only one quart pressure cups then this is the one to have!)

This pressure cup and regulator is perfect for small painting jobs that require precise fluid control. The cup is aluminum and has a one way check valve to prevent fluid from traveling back up into the gun or regulator. The regulator is a bypass regulator for accurate control of cup pressure. 10 psi max.

Parts Sheet - 51-303-R2.
Lid Gasket - 51-334.

The Techline 2 Quart Remote Pressure Cup

(Simple in design and versatile in operation)

This economically priced pressure cup is tough enough to hold up to daily industrial and automotive operation. The unit is designed for ease of use and cleaning. The cup comes with a convenient carrying handle and easy open screw lid. Comes with a bypass regulator, gauge, and a 50 psi working pressure.

Parts Sheet Techline Pressure Cup.
Lid Gasket Techline 2 Quart Gasket.

The Techline 2 Quart Remote Pressure Cup Dual Regulated

(A Real Work Horse!)

Simple in design and versatile in operation. This economically priced pressure cup is tough enough to hold up to daily industrial and automotive operation. The unit is designed for ease of use and cleaning. The cup comes with a convenient carrying handle and easy open screw lid. Comes with double regulators, gauges, and a 50 psi working pressure.

Parts Sheet Techline 2 Qt Cup.
Lid Gasket - Techline 2 Quart.

Bandit 2 Quart Pressure Cup 51-600

C.A. Technologies produces the best 2 quart pressure cup in the industry. The band clamp offers 360 degrees of sealing pressure with the turn of one knob. Comes with a ridged liner for quick color change and cleaning. the underside of the lid, fittings, and fluid tube are all 300 series stainless steel. The wide lid opening makes filling and refilling a snap. It's built like a tank.

Parts Sheet - Bandit Parts Sheet.
Lid Gasket - 51-620-5.
Cup Liners - Bandit Liners.
Bandit Anti-Tip Stand - 51-672.

Why buy the 2 Quart Bandit?

Because is is the best 2 quart pressure cup in the industry. The band clamp offers 360 degrees of sealing pressure with the turn of one knob. Comes with a ridged liner for quick color change and cleaning. the underside of the lid, fittings, and fluid tube are all 300 series stainless steel. The wide lid opening makes filling and refilling a snap. It's built like a tank. Typical outfit shown. Pricing is for Bandit 2 Quart Pressure Cup with double regulation only. Please note agitator not included. See 51-600A and 51-602A.

Parts Sheet - Bandit 2 Qt Pressure Cup.
Lid Gasket - 51-602-5 (5 Pack).
Bandit Liners - 51-637-12.
Bandit Anti-Tip Stand - 51-672

C.A. Technologies 2.5 Gallon Bare Pressure Pot.

Heavy gauge steel construction.
Diameter: 10.5'
Depth: 8.75

This is a bare tank, NO Regulators with this tank.
Lid Gasket - 51-220
Liners - 51-261-12

Working Under Pressure? We Have the Answer!

(Many Models to Choose From)

The 2.5 gallon non-ASME tank from C.A.T. is constructed of heavy gauge steel. The non-agitated pressure pots are Teflon coated inside and out. The pressure pot has wheels for maneuverability or optional stationary feet. Tank inside dimensions: Diameter 10 1/2 ", Depth 8 3/4" Typical tank shown. Pricing is for single regulated no agitator, pressure pot only

Pot Gasket - Pressure Pot, Pressure Tank 2.5 Gallon Gasket
Parts Sheet - Pressure Pot, Pressure Tank 2.5 Gallon.
Sales Sheet - Pressure Pot, Pressure Tank Information.

Control Is the Key!

(Dual Regulation is How To Acheive The Most Control Over The Spraying Finish.)

The 2.5 gallon non-ASME pressure pot from C.A.T. is constructed of heavy gauge steel. The non-agitated pressure pots are Teflon coated inside and out. The tank has wheels for maneuverability or optional stationary feet. Tank inside dimensions: Diameter 10 1/2 ", Depth 8 3/4" Typical outfit shown. Pricing is for double regulated no agitator, pressure pot only

Gasket - 51-220.
Parts Sheet - 2.5 Gallon Dual Regulated
Sales Sheet - 2.5 Gallon Pressure Pots.

The 2.5 gallon non-ASME pressure pot from C.A.T. is constructed of heavy gauge steel. The non-agitated pressure pots are Teflon coated inside and out. The tank has wheels for maneuverability or optional stationary feet. Tank inside dimensions: Diameter 10 1/2 ", Depth 8 3/4" This is a bottom outlet pressure pot. Typical outfit shown. Pricing is for no regulated no agitator, Bottom Outlet PRESSURE POT ONLY

Keeping it Simple, The Best Way to Go!

The 2.5 gallon non-ASME pressure pot from C.A.T. is constructed of heavy gauge steel. The non-agitated pressure pot are Teflon coated inside and out. The pressure pot has wheels for maneuverability or optional stationary feet. Tank inside dimensions: Diameter 10 1/2 ", Depth 8 3/4" Typical outfit shown. Pricing is for dual regulated no agitator, tank only

Get To the Bottom! The Best Way to Dispense Heavy Materials!

The 2.5 gallon non-ASME pressure pot from C.A.T. is constructed of heavy gauge steel. The non-agitated pressure pots are Teflon coated inside and out. The pressure pot has wheels for maneuverability or optional stationary feet. Pressure Pot inside dimensions: Diameter 10 1/2 ", Depth 8 3/4" This is a bottom outlet pressure pot Typical pressure pot shown. Pricing is for single regulated NO AGITATOR, pressure pot only

Parts Sheet - 51-211.
Lid Gasket - 51-220

The 2.5 gallon non-ASME Pressure Pot from C.A.T. !
is constructed of heavy gauge steel. The non-agitated pressure pots are Teflon coated inside and out. The pressure pot has wheels for maneuverability or optional stationary feet. Tank inside dimensions: Diameter 10 1/2 ", Depth 8 3/4" Bottom Outlet Pot Typical outfit shown. Pricing is for dual regulated no agitator, tank only

Working Under Pressure!

5 Gallon Pressure Tank with one air regulator with manual hand agitator.
Heavy Duty Steel Construction.
Diameter: 12.5"
Depth: 21.5"

Lid Gasket: 51-520
Liner: 51-543-10.
Parts Sheet: 51-501

Can You Handle the Pressure? C.A. Technologies Works Under Pressure!

The 2.5 gallon non-ASME pressure pot from C.A.T. is constructed of heavy gauge steel. The non-agitated tanks are Teflon coated inside and out. The pressure pot has wheels for maneuverability or optional stationary feet. Tank inside dimensions: Diameter 10 1/2 ", Depth 8 3/4" Typical outfit shown.

Pricing is for single regulated with air agitator, pressure pot only

Gasket - 51-220.
Parts Sheet - 2.5 Gallon Pressure Pot 51-203.
Sales Sheet - 2.5 Gallon Pressure Pot 51-203.

The C.A. Technologies Non-ASME 2.5 Gallon Pressure Pot constructed of heavy gauge steel, standard top outlet, with inline regulators and air agitator. Pressure Pot dimensions: Depth 8-3/4", Diameter 10-1/2", equipped with wheels for easy maneuverability . With dual regulators and air agit. Typical Outfit shown. Pricing is for tank only as described.

Pressure Pots Get the Job Done!

(What Can You Do With A Pressure Pot? Almost Anything!)

The 2.5 gallon non-ASME pressure pot from C.A.T. is constructed of heavy gauge steel. The pressure pot has wheels for maneuverability or optional stationary feet. Pressure pot inside dimensions: Diameter 10 1/2 ", Depth 8 3/4" Typical outfit shown. Pricing is for double regulated with air agitator, pressure pot only.

Gasket - 51-220.
Parts Sheet - 2.5 Gallon Pressure Pot 51-204.
Sales Sheet - 2.5 Gallon Pressure Pot.

Why Buy Bandit 2 Quart Pressure Cup?

(It is the best 2 quart pressure cup in the industry.)

The band clamp offers 360 degrees of sealing pressure with the turn of one knob. Comes with a ridged liner for quick color change and cleaning. the underside of the lid, fittings, and fluid tube are all 300 series stainless steel. The wide lid opening makes filling and refilling a snap. It's built like a tank. Typical outfit shown. Pricing is for Bandit 2 Quart Tank single regulated with air agitator.

Parts Sheet - Bandit 2 Qt Cup.
Lid Gasket - 51-620-5 (5 Pack).
Bandit Liners - 51-637-12.
Bandit Anti-Tip Stand - 51-672.

It's Built Like a Tank
The Bandit is the best 2 quart pressure cup in the industry. The band clamp offers 360 degrees of sealing pressure with the turn of one knob. Comes with a ridged liner for quick color change and cleaning. the underside of the lid, fittings, and fluid tube are all 300 series stainless steel. The wide lid opening makes filling and refilling a snap. It's built like a tank. Typical outfit shown. Pricing is for Bandit 2 Quart Pressure Cup with double air regulation and air agitator.

Parts Sheet - Bandit 2 Qt Cup.
Lid Gasket - 51-620-5 (5 Pack).
Bandit Liners - 51-637-12.
Bandit Anti-Tip Stand - 51-672

2.5 Gallon Botton Outlet Pressure Pot Handles Heavy Materials!

The 2.5 gallon non-ASME pressure pot from C.A.T. is constructed of heavy gauge steel. The non-agitated pressure pots are Teflon coated inside and out. The pressure pot has wheels for maneuverability or optional stationary feet. Pressure Pot inside dimensions: Diameter 10 1/2 ", Depth 8 3/4" Bottom Outlet Typical outfit shown.
Pricing is for single regulated air agitator, pressure pot only

Gasket - 51-220.
Parts Sheet - 2.5 Gallon Bottom Outlet.
Sales Sheet - 2.5 Gallon .